+8618117273997웨이 신
영어영어
中文简体 中文简体 en English ru Русский es Español pt Português tr Türkçe ar العربية de Deutsch pl Polski it Italiano fr Français ko 한국어 th ไทย vi Tiếng Việt ja 日本語

임펄스 전류 발생기

사용자 설명서

적용 할 수있는 LISUN models: SUGC-C15KV30KA

Open the generator’s accessory compartment and remove the router inside, as shown in the figure below: Connect the router to the instrument’s LAN port using an Ethernet cable.

Impulse Current Generator-Figure1Impulse Current Generator-Figure2

After powering on the router and the generator, open the PAD included with the generator and connect to the corresponding WLAN name in the settings interface. This WLAN is broadcast by the instrument and is not connected to the Internet.

The username and password are the same.

Impulse Current Generator-Figure3Impulse Current Generator-Figure4

WLAN Connection Diagram

Open the app, tap the test software app icon ③ (the operation indicator), and enter the parameter settings screen.

Impulse Current Generator-Figure5

Impulse Current Generator-Figure6

Impulse Current Generator-Figure7

③ Operation Indicator ③ The operation indicator is shown in the figure above. You can then click to enter the test interface and set the voltage.

Impulse Current Generator-Figure8

아래 그림과 같이 :

Impulse Current Generator-Figure9

Click to set the voltage

Impulse Current Generator-Figure10

Click to set the test time

Impulse Current Generator-Figure11

Click to set the number of discharge cycles

Impulse Current Generator-Figure12

Click the checkbox √ to automatically select positive or negative values.

Impulse Current Generator-Figure13

Once you’ve completed the above settings, you can click to run a test.

Impulse Current Generator-Figure14

LED Luminaires and LED Power Driver Test Solution

Goniophotometer System: LSG-5000, LSG-1800B, or LSG-1700B

Spectroradiometer & Integrating Sphere Test System: LPCE-2 or LPCE-3

LED Life Maintains a Test System in Accordance with LM-80: LEDLM-80PL

Waterproof Test for IPX5 and IPX6 Levels: JL-56

Dustproof Testing Machine for IP5X and IP6X Testing: SC-015

LED Power Driver Testers: WT2080 (for the lab) and ATE-2 (for the production line)

Electrical Safety Tester: LS9955

CFL and Electronic Ballast Test Solution

Goniophotometer System: LSG-1800B or LSG-1700B

Integrating Sphere and Spectrophotometer Test System: LPCE-2 or LPCE-3

Adjustable Reference Ballast: DYJ-50HZ, HCS-105A, and DYJ-HID

Electric Ballast Tester: WT5000 (for the lab) and ATE-1 (for the production line)

Digital Torsion Meter and Multiway Life Tester: CH338 CH316

Electrical Safety Testers: LS9922I, ZRS-3H, ZY-3

EMC and EMI Test Solutions for CFL and LED Luminaires

EMI Test System: EMI-9KB or EMI-9KA

Electrostatic Discharge Simulator: ESD61000-2

EFT Immunity Measurement: EFT61000-4

서지 생성기: SG61000-5

Voltage Dips and Interruptions Generator: CSS61000-11

Ring Wave Generator: RWG61000-12

Impulse Current Generator-Figure15

WWW. Lisun그룹닷컴

특허 출원

모든 권리 보유 Lisun 그룹

Subject to Change Without Notice

부록 및 다운로드

비디오

SG61000-5 서지 발생기 - 작동 비디오