클립형 조명기구 테스트 장치

The THJJ-1 Spring Clamping Test Device complies with IEC 60598-1:2008 Clause 4.14.1 Test E and GB7000.1-2007, and is used for tensile testing of lamps mounted with spring clamps.

기술 사양
1. Aluminum alloy frame capable of holding 6 pieces of glass and clamping them in place.
2. 6 pieces of 10mm-thick glass, each measuring 300×300mm
. 3. 1 chrome-plated metal rod with a diameter of 20mm.
4. The force-application device can apply a corresponding tensile force of 20 N to the spring clip.

Test Procedure (According to IEC 60598-1:2008 Clause 4.14.1 Test E):

LED Luminaires and LED Power Driver Test Solution

고니오포토미터 시스템: LSG-6000, LSG-1890B

분광복사계 및 적분구 테스트 시스템: LPCE-2, LPCE-3

LED Life Maintains a Test System in Accordance with LM-80: LEDLM-80PL

Waterproof Test for IPX5 and IPX6 Rating Testing: JL-56

Dustproof Testing Machine for IP5X and IP6X Testing: SC-015

LED 전원 드라이버 테스터: WT2080 (for the lab) and ATE-2 (for the production line)

Electrical Safety Tester: LS9955

CFL and Electronic Ballast Test Solution

고니오포토미터 시스템: LSG-1890B

Integrating Sphere and Spectrophotometer Test System: LPCE-2

Adjustable Reference Ballast: DYJ-50HZ, HCS-105A, and DYJ-HID

Electric Ballast Tester: WT5000 (for the lab) and ATE-1 (for the production line)

Digital Torsion Meter and Multiway Life Tester: CH338 CH316

전기 안전 검사원: LS9923, ZRS-3H, ZY-3

CFL 및 LED 조명기구용 EMC 및 EMI 테스트 솔루션

EMI 테스트 시스템: EMI-9KB or EMI-9KA

정전기 방전 시뮬레이터: ESD61000-2

EFT 면역력 측정: EFT61000-4

서지 생성기: SG61000-5

전압 강하 및 정전 발생기: CSS61000-11

Ring Wave Generator: RWG61000-12

WWW. Lisun그룹닷컴

특허 출원

모든 권리 보유 Lisun 그룹

사전 고지 없이 변경될 수 있습니다.